Duplicator Pro (v4.5.13.6) WordPress Site Migration & Backup Nulled

Duplicator Pro Nulled - WordPress Site Migration & BackUp
Duplicator Pro - WordPress Site Migration & BackUp

Download Free Duplicator Pro – WordPress Site Migration & Backup Nulled v4.5.13.6

Duplicator Pro WordPress Site Migration & Backup Nulled v4.5.13.6 – ThemeForest | Duplicator Pro WordPress Site Migration & Backup Free Download v4.5.13.6 helps you to save your lots of precious time while installing the same theme, plugins or other content on all your sites. Instead of manually configuring the same pro themes and premium plugins over and over, just configure one site and bundle it into a Duplicator package. Then install the package to create a pre-configured site on as many locations as you want!

PRO Features

  • Multisite Support
  • Large Database Support
  • Backup Limits
  • Filter Data
  • Auto Database Creation
  • Easy Plugin Updates
  • Email Notifications
  • Larger Package Support
  • Database File
  • Advanced Options

Other useful features

Drag and Drop

Duplicator Pro now supports Drag and Drop site restores and migrations. Drag the site archive from the bundle to the site that you want to overwrite.

Large-Site Support

The new package engine works faster with larger sites. Confirmed migration for a site of 100GB!

Recovery Points

Recovery Points provide protection against errors and bad updates by quickly rolling back your system to a good, known state.

Backup Limits

To prevent over-staging your cloud or local storage, limit the number of backups you have.

Single File Packages

Duplicator Pro bundles all your sites into one archive. This is unlike other plugins which create many files that are difficult to manage.

Multisite

Besides standard single sites, Duplicator Pro supports multisite network backup & migration. A subsite can be installed as a separate site.

Support for Managed Hosts

You can easily migrate to managed hosts. WordPress.com, WPEngine and Liquid Web Managed are supported.

Streamlined Installer

Installing in just two steps is possible with the new simplified installer mode. A four-step advanced installer mode is also available.

Auto Database Creation

You can easily select existing cPanel users and databases, or create new ones from scratch without leaving the installer.

Notifications by email

You will immediately know if Duplicator is having problems with a backup, has times out, or requires some attention.

Duplicator Pro Free Download Link

Demo

https://snapcreek.com/duplicator/

Changelog Duplicator Pro Nulled

Version 4.5.13.2 – October 10th, 2023
PHP Version: 5.6.20+
WordPress Version: 4.0 or greater
Tested up to: 6.3.1

Plugin: 

[UPD] Updated License Messaging
[FIX] Fixed a problem with initialization settings at plugin startup in some borderline cases.
Version 4.5.13.1 – September 26th, 2023
PHP Version: 5.6.20+
WordPress Version: 4.0 or greater
Tested up to: 6.3.1

Plugin: 

[UPD] Default the summary email is sent only to one email, the “Administration Email Address” option email
[FIX] Fixed an update problem in the case of websites with a large number of users.
[FIX] Fixed an issue where in some cases it was not possible to remove all roles from capabilities
Version 4.5.13 – September 19th, 2023
PHP Version: 5.6.20+
WordPress Version: 4.0 or greater
Tested up to: 6.3.1

Plugin:

[NEW] Only change the WP table prefix case on case insensitive installations
[NEW] Allow importing renamed archives
[NEW] Added support for Google Cloud storage
[NEW] Added support for Cloudflare R2 storage
[NEW] Added support for Wasabi storage
[NEW] Added support for Dream Objects storage
[NEW] Added support for Digital Ocean Spaces storage
[NEW] Added support for Vultr
[NEW] Added option to receive email summaries about backups
[UPD] Updated phpseclib lib at version 2.0.44
[UPD] Updated Requests lib at version 2.0.7
[UPD] Improved license version cache handling
[UPD] Improved storages management
[UPD] Improved storages test function and also enabled for default storage
[UPD] Improved management of the import/export settings function
[UPD] Admin pages UI cleanup
[UPD] Preventing other plugin’s notices to be displayed on Duplicator pages.
[UPD] It is now possible to create storage even if the folder exists in case it contains only packages and no other items outside the backup
[UPD] Now if a local storage is deleted, the folder is also removed.
[FIX] Fixed the handling of many boundary cases in storage classes and improved stability
[FIX] Plugin Auto-update fixed
[FIX] Fixed File Filters checkbox state for templates created on older versions.
Installer:

[NEW] Added handling and validation for installing tables with same name but different cases on case insensitive databases
[UPD] Added version and help information links to import installer header
[UPD] Skip step 2 and step 3 of advanced install if the “Extract Only Files” option is selected
Version 4.5.12.1 – July 26th, 2023
PHP Version: 5.6.20+
WordPress Version: 4.0 or greater
Tested up to: 6.2.2

Plugin:
[UPD] Improve package components.
[UPD] Updated in plugin messaging.
Installer:
[UPD] Improved installer subsite mapping layout.
Version 4.5.12 – June 21st, 2023
PHP Version: 5.6.20+
WordPress Version: 4.0 or greater
Tested up to: 6.2.2

Plugin:

[NEW] Package components feature.
[NEW] Media only backup
[NEW] Filter to only include active plugins/themes in the package
[NEW] Implemented remote notification system
[UPD] Added new Duplicator logo
[UPD] Added memory check required by mysqldump
[UPD] Improve feedback on license activation/deactivation failure
[UPD] Improved admin messages layout
[UPD] Logging appropriate error message when partition for temp files is full during S3 storage transfer.
[UPD] Updated snapcreek.com references with appropriate duplicator.com URLs.
[FIX] Fixed all translation strings functions text domains
[FIX] Fixed an issue where with PHP 7.x it was not possible to update some settings
[FIX] General checking of storages. Applied small fixes regarding logged messages and a few code improvements
[FIX] Applied stripslashes on fields where it was needed.
[FIX] Fixed issue on granular capabilities on WordPress < 4.3
Installer:

[NEW] Only file extractor mode
[UPD] Now the Keep original file time option is also working for the DUP archive as for ZIP Archive
Version 4.5.11.1 – May 17th, 2023
PHP Version: 5.6.20+
WordPress Version: 4.0 or greater
Tested up to: 6.2.1

Plugin:

[FIX]: Fixed a problem with reading global entities in some databases.
[FIX]: Security hardening
[FIX]: Improved capabilities update
Version 4.5.11 – May 8th, 2023
PHP Version: 5.6.20+
WordPress Version: 4.0 or greater
Tested up to: 6.2

Plugin:

[NEW] Granular Duplicator capabilities
[NEW] Added license auto activation logic (Ready for LITE One Click Upgrade)
[UPD] Removed Library ForceUTF8.
[UPD] Made FTP working as storage with cURL option enabled.
[UPD] Improved license info only interface
[UPD] Updated external Blog reference URLs
[UPD] Improved daily actions cleanup logic
[UPD] Improved license activation feedback in case of error.
[UPD] Updated for WordPress 6.2.
[UPD] Updated PHPSECLIB to version 2.0.42
[FIX] Fixed issue related to false detection of the request action
[FIX] Improved labels of some settings.
[FIX] Improved to sanitization of some inputs in the admin
[FIX] Fixed an issue where when importing settings the license visibility password was being reset
[FIX]: Fixed in problem where in some cases the package creation log was being deleted by mistake
Installer:

[UPD] Improved multisite custom URL mapping interface feedbacks
[FIX] Fixed a bad link to FAQ.
[FIX] Cursor is not a pointer any more in the whole validation section, only at the test title part.
[FIX] Fixed switching between “Basic” and “cPanel” options when command is issued from within a validation test.
[FIX] Fix delete item problem on multisite custom URL mapping interface
[FIX]: Fix update options problem on install site in a multisite
Version 4.5.10 – March 8th, 2023
PHP Version: 5.6.20+
WordPress Version: 4.0 or greater
Tested up to: 6.1.1
Overview: Contains a new dashboard widget along with several small fixes and updates.

Plugin:

[NEW] Added new Dashboard widget
[NEW] Added the ability to set a custom recovery folder. Useful for some hosting that blocks PHP scripts in wp-content
[NEW] Reflecting currently chosen license visibility mode in UI whenever possible.
[UPD] License action buttons (“Deactivate” and “Clear”) are visible now in all license visibility modes.
[UPD] Removed Unicode name scan check, improved scan performance
[UPD] Disable google recaptcha plugins during installation
[UPD] DupArchive content encryption and the archive password security keys are changed to SHA256 hash
[UPD]: Improved uninstall logic
[UPD] Updated phpseclib to version 2.0.41
[FIX] Fixed String translation.
[FIX] Removed warnings in bridge mode import with packages created with the mysqldump
[FIX]: Fixed uninstall conflict with LITE version
[FIX]: Fix PHP warning on license object
[FIX]: Fix PHP 8.2 warnings
[FIX]: Fix debug page problem
Installer:

[UPD] Update multisite custom mapping interface
[FIX]: Fix PHP 8.2 warnings
Version 4.5.9.1 – January 1st, 2023
PHP Version: 5.6.20+
WordPress Version: 4.0 or greater
Tested up to: 6.1.1

Plugin:

[UPD] Restructured license system
Version 4.5.9 – December 18th, 2022
PHP Version: 5.6.20+
WordPress Version: 4.0 or greater
Tested up to: 6.1.1

Plugin:

[NEW]: Added additional checks for the presence of recommended security plugins during site scan.
[UPD]: Now possible to import archive from a GDrive link. Archive file’s access must be changed to “Anyone with the link” at Google Drive.
[UPD]: Added phpseclib as part of the external dependencies
[UPD]: Moved ForceUTF8 lib to composer, used php scoper on it, implemented unit tests for functions of the lib that are used by our plugin.
[UPD]: Add link to Manage Recovery Points.
[UPD]: Wrong offset in Dropbox transfer will be fixed automatically when possible.
[UPD]: Improved user feedback in function for checking password of encrypted archive, for shell unzip method.
[UPD]: Improved wording of scanner error message
[UPD]: Added import cloud link support for OneDrive.
[UPD]: Implemented retrials for chunking requests, import from link feature.
[FIX]: Transferring packages to a local storages was bringing errors. Hide local storages in transfer list to avoid error.
[FIX]: Fixed the problem with deletion of older packages for Google Cloud S3 when root folder ‘/’ is used as storage folder.
[FIX]: Storages was getting complicated responses on feedback. Change feedback and storage test places so all test will work.
[FIX]: error_log function were undefined. Add additional check on error_log function.
[FIX]: Preserving cookies in session between consecutive requests for import from link feature. This is required GDrive download.
[FIX]: Fix package creation problem on PHP 8.1
[FIX]: Removed closing then immediately opening php tags after the header comment in the installer.php file
[FIX]: Fixed a problem where defines WP_PLUGIN_DIR and WPMU_PLUGIN_DIR were being added in the wp-config when not needed.
[FIX]: Fixed a few bugs regarding “Import from link” feature and its remote download.
[FIX]: Fixed test connection for GDrive for case when storage folder is empty.
Installer:

[NEW]: Setting “Extraction Mode” to manual extract by default if a manual extract is detected.
[UPD]: MySQL failure notice type updated
[UPD]: Sites with file filters are considered now as importable sites
[FIX]: Fixed scenario when wp config sample should be used
[FIX]: It is now possible to continue installation after manual extraction of encrypted even if ZipArchive and shell zip/unzip are not installed.
[FIX]: Fixed problem when wp-config.php was missing
[FIX]: Disabled advanced file time parameter for DupArchive
[FIX]: Removed closing then immediately opening php tags after the header comment in the installer.php file
[FIX]: Updated logic for providing correct admin login url at the last install step, even for cases when login url changed by security plugin
[FIX]: Fixed an issue that generated package creation failure with old templates
[FIX]: Fixed problem with getting details about package transferred to storage (Remote Storage Locations dialog)
Version 4.5.8.3 – November 23rd, 2022
PHP Version: 5.6.20+
WordPress Version: 4.0 or greater
Tested up to: 6.1.1

Plugin:

[FIX]: Improved installer bridge code
Version 4.5.8.2 – November 21st, 2022
PHP Version: 5.6.20+
WordPress Version: 4.0 or greater
Tested up to: 6.1.1

Plugin:

[FIX]: Added logic to allow installs on GoDaddy Managed accounts
[FIX]: Escaped mysqldump custom command to harden input data (thanks Adel Bouaricha)
Version 4.5.8.1 – November 9th, 2022
PHP Version: 5.6.20+
WordPress Version: 4.0 or greater
Tested up to: 6.1

Plugin:

[FIX]: Fixed saving to secondary local storage
Version 4.5.8 – October 30th, 2022
PHP Version: 5.6.20+
WordPress Version: 4.0 or greater
Tested up to: 6.0.3

Plugin:

[NEW]: Implemented chunking system for local storage
[UPD]: Removed the “skip archive validation” checkbox from Dropbox endpoint
[UPD]: Add additional testing to path added by user
[FIX]: fixed bug related to dropbox getting stuck on hash validation
Installer:

[NEW]: Added an option for skipping the source path replacement
[NEW]: Show detailed error message in case of PHP incompatibility after install.
[UPD]: Added the validation of WP config database constants and auto switch with a warning to a sample wp config in case if they do not exist
[UPD]: The Site title can now be set in Basic Mode as well
[UPD]: Improved layout to match updated help and visually sync with the Lite version
[FIX]: Fixed an error in case the default charset is invalid
Version 4.5.7 – September 19th, 2022
PHP Version: 5.6.20+
WordPress Version: 4.0 or greater
Tested up to: 6.0.2

Plugin:

[UPD]: Updated the message in case of removed recovery point
[UPD]: Improved error detection during setting recovery point
[UPD]: Improved checking of required functions and classes in requirements section, just before package creation
[UPD]: Updated the German translation
[UPD]: Fixed template save button being disabled
[FIX]: Miscellaneous internal fixes and improvements
[FIX]: Fixed the local storage export file warnings due to a missing SQL file
Installer:

[NEW] Added new validation test called “PHP Functions and Classes”
[FIX]: Miscellaneous internal fixes and improvements
Version 4.5.6 – August 30th, 2022
PHP Version: 5.6.20+
WordPress Version: 4.0 or greater
Tested up to: 6.0.1

Plugin:

[NEW]: Enhanced the imported package information under package details
[UPD]: Fixed invalid state error when wrong auth code is entered for OneDrive
[UPD]: Update Tippy to latest version and refactor tooltip related event handlers that were reported as deprecated by jQuery Migrator.
[UPD]: Removing old constant DUP_SECURE_KEY from wp-config if new one is prepared/exists.
[UPD]: Added a quick fix to remove installer files when scheduled build fails
[UPD]: Updated api client for Google Drive, since Google will no longer support the “out of band” flow.
[UPD]: Removed the usage of shell_exec and instead using exec.
[FIX]: Added checks to prevent creating local storages inside core WordPress directories.
[FIX]: Added checks to prevent creating more than one local storage in the same folder.
[FIX]: Exception class name is displayed in the “test s3connection” dialog for S3 remote storage configuration.
[FIX]: Skip disk checks if PHP disk functions are not available
[FIX]: Compatibility with Google Cloud in S3 mode fixed
[FIX]: Fixed OneDrive notices that were appearing after authorization of personal OneDrive storage.
[FIX]: Clearing the output buffers before ending the buffering output
[FIX]: fixed timezone and server time strings in the “Tools” screen
[FIX]: Now possible to create multiple Google Drive storages for the same account
Installer:

[NEW]: Now importing a site to a multisite also handles installations with multiple domains
[UPD]: Removed the usage of shell_exec and instead using exec.
[FIX]: Fixed bug related to upload url not being correctly replaced in some cases when doing a subsite standalone install with SSL enabled
[FIX]: Clearing the output buffers before ending the buffering output
Version 4.5.5.2 – July 31st, 2022
PHP Version: 5.6.20+
WordPress Version: 4.0 or greater
Tested up to: 6.0.1

Plugin:

[FIX]: Fixed bugs related to SFTP transfers that were introduced in v4.5.5
Version 4.5.5.1 – July 24th, 2022
PHP Version: 5.6.20+
WordPress Version: 4.0 or greater
Tested up to: 6.0.1

Plugin:

[FIX]: Fixed blank screen after exceeding max build time
Version 4.5.5 – July 18th, 2023
PHP Version: 5.6.20+
WordPress Version: 4.0 or greater
Tested up to: 6.0.1

Plugin:

[NEW]: Split and adapted form tables for 3 different kinds of S3 providers, including one specialized for Backblaze.
[UPD]: Improve recovery point UI with help icons
[UPD]: Added a feature to remove unused plugins and themes
[UPD]: Improved handling of installer file name and filters applied to it in the code
[UPD]: Removed usage of DUP_PRO_RestoreOnly_Package class
[UPD]: Improve scanner message for mixed-case DB tables names
[UPD]: Improved scheduled build email with additional information about the package
[UPD]: “Save Brand” button disabled except when it is needed.
[UPD]: Disable notice that recommends Duparchive on a new site
[UPD]: Exposed real region values in UI for Amazon S3 Direct storage, next to the human readable strings
[UPD]: Added a specific error message for cases where the archive package file is missing
[UPD]: Updated phpseclib to the latest version
[UPD]: Make multisite tab (build step 1) visible for all license types, but only enabled for Business and Gold
[UPD]: The tmp folder will be emptied every 24 hours
[FIX]: Eliminated image overflow problem in branding preview
[FIX]: Fixed strings referring to Amazon S3
Installer:

[NEW]: Added a feature to remove users without permissions
[UPD] Showing correct message on AJAX error with status code and appropriate documentation link
[UPD]: Improved the Cleanup Labels in the Advanced Installer
[UPD]: Added an explanation to help for the Cleanup options
[UPD]: Prevent click of browser backward and forward buttons
[UPD]: Introduced a new archive check for manual extracts
[UPD]: Encapsulated the check for manual extracts case and installation directory existence
[FIX]: Fixed invalid charset and collate replace bug
[FIX]: Fixed the missing getSuperAdminsUserIds method in DUPX_MU
[FIX]: Create new tables option not to trigger the count of affected tables
[FIX]: Fixed a bug that was preventing the installer to work if “Create Database” is selected in the first step
Version 4.5.4 – June 14th, 2023
PHP Version: 5.6.20+
WordPress Version: 4.0 or greater
Tested up to: 6.0.1

Plugin:

[UPD]: Storage keys/pass for S3/FTP/SFTP are not rendered in HTML, the values to be retained on the server
[UPD]: Make link to FAQ for Max Build Time quick fix open in new window
[UPD]: Updated Save button for Schedules, Storages and Templates to be disabled by default
[UPD]: Improved feedback messages for “Test S3 Connection” so users can identify connection problems more accurately
[UPD]: Enhanced mysqldump error message
[FIX]: Improved Multisite message for package scan at “Personal” license level
[FIX]: Fixed an issue with symbolic link inserted in a local storage and not automatically filtered when creating the package
[FIX]: Fixed timeout problem on same servers for import/recovery package prepare
[FIX]: Fixed a problem in the rename of the installer.php file after installation
[FIX]: Eliminated image overflow problem in branding preview
[FIX]: Tables with no WP prefix are correctly filtered when the filter is set in a template
[FIX]: DupArchive compression setting is not switched on automatically anymore with PHP < 7.0
Installer:

[UPD]: Improved GTID mode detection in installer validation
[UPD]: Improved performance on AddonSites search
[UPD]: Improve the installer database action names in step 1
[FIX]: Fixed path handling in case of modifying ABSPATH starting from a site with standard configuration
[FIX]: Add a check to prevent trying to delete the duplicator_pro_packages table if it was filtered out from the archive
Version 4.5.3.2 – June 8th, 2022
PHP Version: 5.6.20+
WordPress Version: 4.0 or greater
Tested up to: 6.0

Plugin:

[FIX] Removed clearing of update_plugins transient since occasionally caused problems with other plugins/themes
[FIX] Better error handling when .htaccess not permitted to be created
[FIX] Addressed problem when migrating NinjaForms
Version 4.5.3.1 – May 29th, 2022
PHP Version: 5.6.20+
WordPress Version: 4.0 or greater
Tested up to: 6.0

Plugin:

[UPD]: Update tested version and core file list to WordPress 6.0
[FIX]: Fixed a problem in package creation in case the root path is /
[FIX]: Fixed an error in case the phpinfo function is disabled
Version 4.5.3 – May 23th, 2022
PHP Version: 5.6.20+
WordPress Version: 4.0 or greater
Tested up to: 5.9.3

Plugin:

Plugin [NEW]: Archive password encryption, improved support for AES-256 encryption on the archive.zip/daf file
Plugin [NEW]: Auto updates for the plugin are now available Updated EDD_SL_Plugin_Updater to version 1.9.1
Plugin [NEW]: Added functionality to download packages saved at non-default local storage from the front-end
Plugin [NEW]: Added link for downloading the installer file in the “Package File Links” dialog box in the package’s details page
Plugin [NEW]: Added automated installer cleanup options in Settings ❯ Packages Tab ❯ Cleanup Modes (Email Notice and Auto Cleanup)
Plugin [UPD]: Minimum version required PHP 5.6.20
Plugin [UPD]: Removed the old CRON library and setting so that the schedule library only uses the new one
Plugin [UPD]: Improve the content and layout of the Duplicator Pro Tutorial
Plugin [UPD]: Update the Templates and edit UI to be closely correlated to the create package UI
Plugin [UPD]: Improved import fail message
Plugin [UPD]: Updated Duplicator Pro define auth key name
Plugin [FIX]: Improved time zone handling for scheduled builds
Plugin [FIX]: Eliminated image overflow problem in branding preview
Plugin [FIX]: Fixed a problem with reading the list of MySQL enabled engines
Plugin [FIX]: Improved storage information handling
Plugin [FIX]: Fixed error on WP-CLI plugin activation
Plugin [FIX]: Fixed a problem in the creation of the package with the mysqldump in some configurations of the DBHOST
Plugin [FIX]: Installer can be downloaded and package transferred when the package is created on WPEngine or Cloudways hosting
Installer:

Installer [NEW]: Archive password encryption
Installer [FIX]: Fixed problem of interference of .htaccess from dup-installer folder with the installer
Installer [FIX]: Fixed toggle password on the new admin password field
Version 4.5.2 – April 19th, 2022
PHP Version: 5.3.8+
WordPress Version: 4.0 or greater
Tested up to: 5.9.3

Plugin:

[NEW]: Plugin Hooks now available for developers.
[NEW]: Added option to automatically filter files with invalid encoded names
[UPD]: Improved form to use relative URLs in action
[UPD]: Minor installer UI improvement including improving the tutorial
[UPD]: Removed SSL Verify setting from the Settings ❯ Packages ❯ Advanced UI
[FIX]: Fixed wp-content quick link in templates
[FIX]: Fixed wrong calculation of time for scheduled backups related to Daylight Saving Time
[FIX]: Fixed problem with Backblaze related to object-level ACLs
[FIX]: Fixed bug related to having multiple creation queries for MySQL Procedures and Functions
[FIX]: Fixed an issue in the DupArchive that occasionally caused validation to fail
[FIX]: Fixed bug in Cron expression library that prevented a schedule from saving when: Monthly (any day) of every 12 months was set
[FIX]: Improve wording on Step 1 filters
Installer:

[NEW]: Added option to set SQL connection flags in wp-config
Version 4.5.1 – March 15th, 2022
PHP Version: 5.3.8+
WordPress Version: 4.0 or greater
Tested up to: 5.9.3

Plugin:

[NEW]: Encryption key is now stored in wp-config.php instead of dynamically determined
[UPD]: The Cron Expression is now the recommended and default parser
[UPD]: Improved UI dialog for FTP/SFTP connection tests and overall feedback and status
[FIX]: Show single quick fix when build time exceeds max build time
[FIX]: Fixed a problem in the creation of the package when the wp-config was in the parent folder in spite of ABSPATH
Installer:

[NEW]: Improve Bitnami support
[UPD]: In case the wp-config does not have write permissions the wordpress prefix is updated correctly
[UPD]: Improved validation test for new table names that exceed 64 chars, for cases when importing site(s) into multisite
[UPD]: Improve the database confirmation dialog to show for an empty database
[FIX]: Removed the htaccess from the dup-installer folder that could cause problems in some cases
Version 4.5.0 – February 21st, 2022
PHP Version: 5.3.8+
WordPress Version: 4.0 or greater
Tested up to: 5.9

Plugin:

[NEW]: Import package with URL. Allows server-to-server package transfer – No need to download a package to your desktop machine!
[NEW]: Server-to-server Dropbox import support added
[NEW]: Added a new option that allows you to set a custom path for importable packages
[NEW]: Improved UX when storages associated with schedules are deleted
[NEW]: Added bulk activate and deactivate options for schedules
[NEW]: Manual transfer screen updated to include quick copy links for hashed files
[UPD]: disable S3 storage if any curl_multi_* function is disabled
[FIX]: Not showing the activation notice for plugins which are already activated once
[FIX]: Fixed bug related to the basic auth quick fix notification not being displayed
[FIX]: fixed filter_var bug with PHP versions less than v5.4.8
[FIX]: Validation performed on filters only in case when they are ON
Installer:

[NEW]: Added validation message notifying the user about having multiple WP installations on the same database
[NEW]: Added support for SSL connections to remote mysql servers
[NEW]: Check if index.html exists on destination site and, if it does, displays a warning in the final report
[UPD]: Reorganized database parameters in advanced mode
[UPD]: Removed non-braking spaces option
[UPD]: In “Backup and Rename Existing Tables” action, if limit of 64 chars in table name is exceeded, made sure that new table name is unique
[NEW]: Added new validation test in ‘Classic install’ which tests if limit of 64 chars in table name is exceeded by adding prefix
[FIX]: Fixed bug where paths with no write permission are not being displayed
[FIX]: Fixed timeout error that was happening on some hosts when exec command hangs
[FIX]: fixed PROCS, VIEWS and FUNCTIONS creation bug for older versions of PHP
[FIX]: Copy Recovery URL button now works in import installer
Version 4.0.6.2 – February 4th, 2022
PHP Version: 5.3.8+
WordPress Version: 4.0 or greater
Tested up to: 5.9

Plugin:

[FIX]: Fixed problem that prevented sites with expired certificates from importing.
Installer:

[FIX]: Fixed problem with serialized objects getting corrupted when they had non-breaking spaces between strings.
Version 4.0.6.1 – February 1st, 2022
PHP Version: 5.3.8+
WordPress Version: 4.0 or greater
Tested up to: 5.9

Plugin:

[FIX]: Fixed SFTP data storage
[FIX]: Enhanced import logic to account for case when hosting prevents PHP files from being executed inside wp-content
[FIX]: Added preliminary check when setting up the Recovery Point to make sure recovery is possible.
Version 4.0.6 – January 10th, 2022
PHP Version: 5.3.8+
WordPress Version: 4.0 or greater
Tested up to: 5.9

Plugin:

[NEW]: Added option that allows to exclude all tables that do not have the prefix of the current wordpress installation
[NEW]: Added option that allows to exclude all tables that belong to deleted sites in a multisite installation
[NEW]: Bulk subsite import in multisite
[UPD]: Updated error messages that appears if a user tries to activate Duplicator Pro plugin while Lite version is active
[UPD]: Symlinks for main WordPress folders (wp-content, plugins …) managed as normal folders in case they are children of home path
[UPD]: Added schedule name to scheduled package built emails
[UPD]: Improved the accessibility of the packages screen and the overall build process
[UPD]: Writing better description in log when installer files present during (scheduled) build
[FIX]: Now backup-dup-pro folder is correctly filtered automatically even if wp-content is a symlink
[FIX]: Safe mode docs and settings are now properly set to Enabled/Disabled
[FIX]: Removed unnecessary check in EDD client
[FIX]: Third party backup folders are again filtered and not included in packages by default
[FIX]: Fixed bug in the startup of the Drag and Drop installation that in some rare cases was not executed correctly
[FIX]: Fixed recovery point bug that would timeout at startup when working on large sites on slow hosting
[FIX]: Fixed DupArchive timeout bug when working with large databases
Installer:

[NEW]: Bulk subsite import in multisite
[UPD]: Added validation test for REST API
[UPD]: Improved the database cleanup transients function which could timeout in large sites
[UPD]: Improved performance of the boot startup with the DupArchive
[UPD]: Now you can import non-complete packages into a multisite
[FIX]: Removed all the visible references to Duplicator in a branded installer
[FIX]: Removed some checks of the REST calls that caused the installation to fail in case of self signed certificate
[FIX]: iThemes Security and Easy HTTPS Redirection plugins automatically deactivated during installation
[FIX]: Fixed recovery package age in validation
[FIX]: chunked the table prefix replace regex to work with large number of tables
[FIX]: SAPI check now catches SAPI: apache2handler
Version 4.0.5.3 – November 24th, 2021
PHP Version: 5.3.8+
WordPress Version: 4.0 or greater
Tested up to: 5.8.2

Plugin:

[FIX]: Removed auto switch of client side kickoff when package determined stuck
[FIX]: Increasing time required that determines when a package is stuck – increases build reliability especially on slower systems
Version 4.0.5.2 – November 22nd, 2021
PHP Version: 5.3.8+
WordPress Version: 4.0 or greater
Tested up to: 5.8.2

Plugin:

[UPD]: Updated certificate for SSL requests
Installer:

[UPD]: Updated certificate for SSL requests (Out of date certificates affected imports on some machines)
Version 4.0.5.1 – November 8th, 2021
PHP Version: 5.3.8+
WordPress Version: 4.0 or greater
Tested up to: 5.8.2

Plugin:

[FIX]: Fixed a warning message that appeared in case other plugins generated an unexpected output
Installer:

[NEW]: Implemented ZipArchive throttling
[NEW]: Added HTTP headers disabling caching during install
[FIX]: Charset and collate replace bug fixed
[FIX]: Fixed a bug when trying to duplicate a site in the same multisite
[FIX]: Automatically setting ZipArchive throttling for Siteground
[FIX]: Chunked the table prefix replace regex to work with large number of tables
[UPD]: Require site that is importing a package to run a version of Pro at or greater than the version that created the package
[UPD]: Improved instructions for manually removing the maintenance file generated by the installer.
Version 4.0.5 – October 18th, 2021
PHP Version: 5.3.8+
WordPress Version: 4.0 or greater
Tested up to: 5.9

Plugin:

[NEW]: Plugin now capable of importing Duplicator Lite packages
[UPD]: Reduced queries executed in the frontend for better optimization
[UPD]: Improve the schedule ‘Run Now’ icon on the main packages page
[UPD]: Fix manual transfer status with OneDrive and improve UI workflow
[FIX]: Fixed the dead lock that occurred in some rare cases
[FIX]: Fixed autoselection of cPanel tab, when the ‘Auto Select cPanel’ checkbox for the Template is checked
[FIX]: Fixed an issue with the installer starting to import if loading a package after a migration
[FIX]: added check to make sure we are deleting the installer file at cleanup
[FIX]: Fixed autoselection of cPanel tab
Installer:

[NEW]: Standalone → Multisite subsite feature officially released
[NEW]: Advanced user import for multisite subsite installs (standalone and subsite sources)
[NEW]: Added next step and final report notices for config files in main folders
[NEW]: Added validation test and automatic search and replace for invalid MySQL engines
[NEW]: User mode added
[UPD]: Keep user now work on multisite
[UPD]: Improve wording for SHOW VARIABLE Validation check
[FIX]: Fixed multisite subsite import issue where Duplicator was activated both at the network level and subsite level
Version 4.0.4.1 – September 8th, 2021
PHP Version: 5.3.8+
WordPress Version: 4.0 or greater
Tested up to: 5.8.1

Plugin:

[NEW]: Added new streaming/fopen mode for Google Drive. Helps machines getting timeouts using cURL.
[FIX]: Addressed PHP 8 incompatibility with S3 functionality
Installer:

[NEW]: Require user enter archive name on overwrites when default installer name used with no password (Enhances Security)
[NEW]: Change default and show notice in case FORCE_ADMIN_SSL config is set and package is being installed with no SSL
[FIX]: Fixed a problem on serialized strings that contained objects with properties with serialized strings
Version 4.0.4 – August 16th, 2021
PHP Version: 5.3.8+
WordPress Version: 4.0 or greater
Tested up to: 5.8

Plugin:

[NEW]: Caches of many plugins are purged after a migration.
[NEW]: New scanner check for PHP 64-bit architecture for 2GB notices
[NEW]: Added outbound IP address to tools section
[NEW]: Added ability to run any package listed as recovery point directly in the package list
[NEW]: Added the possibility to download the recovery launcher
[NEW]: Now Duplicator PRO cannot be activated if LITE is active
[UPD]: Improved ZIP archive single and multi-threaded mode package creation speed
[UPD]: Improved message shown when storage endpoint can’t be read
[UPD]: Changed coloring of delete package import message
[UPD]: Additional polish and cleanup of license messages
[UPD]: Improve Package Details Error notice message
[UPD]: Removed old webfont files and references
[UPD]: Improve help and enhance the visibility of the Import UI Screens
[UPD]: Fixed ‘use current’ quick link in installer section of first page of build
[UPD]: Updated recovery feature UI on package list page
[UPD]: Updated filter selection UI on tables to work on large number of tables (10K tables tested).
[UPD]: Updated the parsely library to version 2.9.2
[UPD]: Updated the duplicator_pro_entities table to handle larger serialized objects
[UPD]: Updated for WordPress 5.8
[FIX]: No longer removing corrupt tables from list of tables available for filtering on build step 1
[FIX]: Fixed tables filter with hight number of tables selected
[FIX]: Updated the list of filtered tables in the package details (previously they were not displayed)
[FIX]: Added logic to show quick fix when ZipArchive failed in various places
[FIX]: Copying a template to another template, in some cases the source template ID was not handled correctly
[FIX]: Send email when schedule errors out due to requirements failing
Installer:

[NEW]: Hooks system added installer
[NEW]: added option that allows one to remove definer statements from create queries
[NEW]: Subsite to multisite overwrite function enabled
[NEW]: Addon system implemented installer
[NEW]: Remove only media option added
[NEW]: Validation test added that shows a list tables that are affected by the database action.
[UPD]: Updated UI elements when no triggers present
[UPD]: Improved restore backup mode installer selection
[UPD]: Removed old webfont files and references
[UPD]: Now the new URL is editable only in advanced mode
[UPD]: Improved bulk DELETE and UPDATE queries by chunking them
[FIX]: Ignore cPanel pre-fills from package creation step 1 in case of an import install
[FIX]: Fixed the selection of tables to be extracted in advanced mode with large number of tables
[FIX]: Fixed bug with tables that are removed in import validation when import option of subsite enabled
4.0.3.2 Patch
Release Date: 2021-7-3
Plugin [UPD]: Enhanced Security for installer name handling

4.0.3.1 Patch
Release Date: 2021-6-29
Plugin [FIX]: Fixed bug with schedules not starting on time

4.0.3
Release Date: 2021-6-13
PHP Version: 5.3.8 or higher
WordPress Version: 4.0 or greater
Tested up to: 5.8
Overview:
The 4.0.3 release was a culmination of many bug fixes through-out the application including many log improvements. The major new features included importing a sub site in network new subsite and the ability to install single site on existing network which is part of our overall multisite support initiative.

PLUGIN
[NEW]: Removed Installer name with hash notice
[NEW]: Added integrity check to make sure main installer files and folders exist in the archive
[NEW]: Added a notice at step 2 of the building process under “System” that checks the PHP memory limit
[NEW]: Beta features page added
[NEW]: Beta feature MU import checkbox added
[UPD]: Added logic to validation stage 1 of the DB PHP dump to make sure that all tables were created
[UPD]: Improved interface of configuration files options
[UPD]: Improve package storage popup storages list
[UPD]: Added a check to build scan process when SQL FUNCTIONS are present
[UPD]: Improved invalid license notice and removed “Rejected” image
[UPD]: Improved Drag and Drop import error message in case ZipArchive module is not present
[UPD]: Improved scan file writes error checking
[UPD]: Improve package log
[UPD]: Update import subsite from a network to another network
[UPD]: Improved quick fix and failed schedules notice. Added dismiss button
[UPD]: Now considering the ‘best’ license between importer and installer when running a D&D import
[FIX]: Installer backup file renamed after extraction for import and recovery in case extension not set to .php
[FIX]: Package storage color indication was wrong in a few cases
[FIX]: Corrected header type when downloading migration export file
[FIX]: Package can’t be built in the Windows IIS Server.Plugin
[FIX]: Fixed bug causing auto filters not being displayed on the scan page
[FIX]: Prevent package creation error on cleanup phase after package creation
[FIX]: Fixed settings property of null error when user settings are missing from the DB
[FIX]: Only allow import if import capability present
[FIX]: Trace View log link wasn’t working
[FIX]: fixed bug where “Network Site Filters” warning would always be shown at scan
[FIX]: Trace View log link on trace log page click didn’t refresh the log page
[FIX]: Import functions work correctly with import capability
[FIX]: Improved Activate Plugins notice
[FIX]: Fixed activate plugin notification bug
INSTALLER
[NEW]: Added validation item that checks if the DB user has resource restrictions (queries/connections/updates per hour)
[NEW]: Import sub site in network new subsite
[NEW]: Added install single site on existing network
[NEW]: Disable all subsite import installation types in case Duplicator version is less than 4.0.3
[NEW]: Added handling of SQL FUNCTIONS
[NEW]: Added validation test to the installer that checks for PHP memory limit
[NEW]: Added net database action “Connect and remove only existing tables”
[NEW]: Overviews added for all installation types
[UPD]: Improved standalone migration file handling logic, only files belonging to subsite are extracted into the right destination
[UPD]: Improve installer option help
[UPD]: Improved DupArchive extraction error checking
[UPD]: Moved blog title selection from step 2 to step 1
[UPD]: Moved keep users option from step 2 to step 1
[UPD]: Now the available admin users are correctly updated according to the site you want to overwrite in the network
[FIX]: Now replacing only contents of tables that have a string column (not considering set and enum
[FIX]: Fixed skip query regex in case of standalone installation with mysqldump
[FIX]: Updated functions that remove www from domains
[FIX]: fixed view already exists error on site overwrite
[FIX]: proc/view/func already exists
4.0.2.2 Patch
Release Date: 2021-5-12
Plugin [FIX]: Improved PHPDump chunk in case of servers with very slow disk writes

4.0.2.1 Patch
Release Date: 2021-4-28
PLUGIN
[NEW]: Flywheel manage hosting support added
[UPD]: Optimized php dump (multithreaded mode)
[UPD]: Updated plugin for WordPress 5.7
[FIX]: Fix temp folder cleanup on package creation
[FIX]: Make the wider import package progress bar in WordPress 5.7
[FIX]: Purge SFTP storage packages
[FIX]: Removed SFTP mcrypt_* function warnings that caused log problems on PHP 7.1
INSTALLER
[UPD]: Transient cleanup function optimized
[UPD]: “Run all CREATE queries at once” option disabled if # tables in source site > 200
[UPD]: highlighting on final report tables removed
[FIX]: Now the value of the table wp_site after a multisite migration is correctly updated
[FIX]: Check if is_executable exists before using it
[FIX]: Improved custom upload path validation
[FIX]: Fixed problem with migrating super admins during a standalone migration
[FIX]: Fixed filter table management on installer advanced mode with many tables (300 >)
[FIX]: Fix db connection on create new database

4.0.2
Release Date: 2021-2-7
PHP Version: 5.3.8 or higher
WordPress Version: 4.0 or greater
Tested up to: 5.6
PLUGIN
[NEW]: Added TRIGGER detection to the scanner
[UPD]: Add template recoverable check and layout on template edit and template list
[UPD]: Add schedule recoverable check and layout on schedule edit and schedule list
[UPD]: Allow import of multisite packages that have even one subsite with no filtered tables and paths
[UPD]: Display in scanner which subsites won’t be importable in the “Network” section
[UPD]: List of main URLs of current installation added to diagnostics
[UPD]: Duplicator messages are now displayed only if user has export capabilities
[UPD]: Added sensitivity markers to package share links box
[UPD]: Allow import of multisite packages that have even one subsite with no filtered tables and paths
[UPD]: Display in scanner which subsites won’t be importable in the “Network” section
[FIX]: Fixed the package creation in case of a multisite installation that has the upload folder as blogs.dir
[FIX]: Fixed a problem with scheduled packages where email not sent when database capture problem encountered
[FIX]: Now if a schedule fails in a multisite installation the message is correctly displayed
[FIX]: Fixed display of filtered tables and paths belonging to a subsite in the scanner
[FIX]: Fixed storage of original file function after migration
[FIX]: Copy template functionality bug fixed
INSTALLER
[NEW]: Added Validation item for TRIGGERS and copy-to-clipboard button
[NEW]: Add option “extract only media file and plugins and themes that don’t already exist”
[UPD]: In import disable Multisite install and install of those subsites which have filtered tables
[UPD]: In import disable Multisite install and install of those subsites which have filtered tables
[UPD]: In recovery mode, show soft warning instead of a hard when one doesn’t have permissions to config files.
[FIX]: Fixed the permissions check on “other” configuration files was wrong (php.ini user.ini web config)
[FIX]: Fixed the check on configuration files in case the file’s owner is not the same as PHP user
[FIX]: If the installer cannot manage a configuration file (wp-config, htaccess …) it continues without modifying the file.
[FIX]: Fix installation if home path ise equal at home path
[FIX]: Now CACHEHOMEPATH is correctly updated in the wp-config.php with the final slash
[FIX]: Status of the archive in the information is displayed correctly
[FIX]: Fixed several capitalization and wording issues
[FIX]: Redundant option on subsite to standalone migration works properly

4.0.1.2
Release Date: 2020-12-21
WordPress Version: 4.0 or greater
PHP Version: 5.3.8 or higher
FIXES
-Plugin: PHP 8.0 fixes
-Plugin: Fixed bug with cancellation of package build
-Installer: PHP 8.0 Fixes
-Installer: Fixed file permissions problem with duparchive

4.0.1.1
Release Date: 2020-11-28
WordPress Version: 4.0 or greater
PHP Version: 5.3.8 or higher
FIXES
-Plugin: Fixed problem involving capturing tables with compound keys

4.0.1
Release Date: 2020-11-23
WordPress Version: 4.0 or greater
PHP Version: 5.3.8 or higher
NEW
-Plugin: Advanced mode added to import option
-Plugin: Greatly improved efficiency of handling large databases
-Plugin: Migration status updated to include filtered tables
-Plugin: Replaced deprecated qtip library with popper
-Plugin: Added PHP version to scanner
-Plugin: Added option for SQL file split for more reliable chunking
-Plugin: Settings > Storage options split out into separate tabs
-Installer: Reworked permissions file checking
-Installer: Greatly improved efficiency of handling large databases
-Installer: Overhauled charset/collation system and made much more robust
-Installer: Added options allowing one to delete existing files on site overwrite
FIXED
-Plugin: Uninstall works with delete options
-Plugin: Handling bad tokens better
-Plugin: Reworked how Duplicator Pro related options are removed on uninstall
-Plugin: Tweaked Google client code to prevent warnings on PHP 7.4
-Plugin: Improved validation checks
-Plugin: Improved validation message regarding managed hosting presence
-Plugin: Auto disable the One Click SSL plugin when not installing to https
-Plugin: Quick fix formatting fixed
-Plugin: Fixed handling of DUPLICATOR_PRO_PLUGIN_PATH on Windows machines
-Plugin: Improved package log to include transfer
-Plugin: Quickfix message for scheduled build timeouts fixed
-Plugin: Better notification about lack of export capability
-Plugin: Scrubbed default storage folder name for storages
-Installer: Removed SQL Invoker/Definer settings for recovery installs
-Installer: Improved foreign key management when clearing/backing up database tables
-Installer: Import > Archive namecheck improved
-Installer: Improved management of special defines in wp-config.php
-Installer: Improved wording in Wordfence notification message
-Installer: Improved table case validation test
-Installer: Fixed home path replacement bug when wp-content outside of home path
-Installer: Reworked permission file check for installer validation
-Installer: Improved permissions setting so it is included in chunking
-Installer: Rewrite of collation/charset determination logic
-Installer: Handling of installing packages from sites that were on root improved
-Installer: Fixed removal of inactive plugins and themes for subsite->standalone
-Installer: Explicitely handle lack of tokenizer

4.0.0.1
Release Date: 2020-9-28
WordPress Version: 4.0 or greater
PHP Version: 5.3.8 or higher
NEW
-Plugin: Import menu moved to main menu area. See this article for a description of the Drag and Drop import process.
FIXED
-Plugin: Added ‘notablespaces’ flag for mysqldump builds – addresses permission problem with some MYSQLDump versions
-Plugin: Removed bad reference to Duplicator Lite code that impacted some systems using non-default color scheme
-Plugin: Improved help for Recovery Point and Drag and Drop import screens
-Plugin: Moved temporary import directory to subdirectory in backups-dup-pro
-Plugin: Fixed check for non-importable package
-Installer: Logging improved

4.0.0
Release Date: 2020-9-9
WordPress Version: 4.0 or greater
PHP Version: 5.3.8 or higher
NEW
-Plugin: Drag and Drop installation of packages now supported (Tools > Import). See this article for a description of the process.
-Plugin: Recovery Point support. Provide protection against mistakes and bad updates. See this article or the help at top of Tools > Recovery for full explanation.
-Plugin: Improved support for managed hosts: WordPress.com, WPEngine, GoDaddy Managed, Liquid Web Managed, and Pantheon
-Plugin: New FTP option to use cURL. Helps with FTP servers that don’t support REST (Storage > FTP > cURL)
-Plugin: New SFTP option to send all in one PHP process time (Storage > SFTP > Chunking Disable)
-Plugin: Overhauled package validation system
-Installer: New “Basic” mode added. Only two steps!
-Installer: Backup mode auto detected (URL replacement skipped when URL and path remain the same)
-Installer: New validation system – one validation for general and database checks.
FIXED
-Plugin: Fixed SFTP test button bug
-Plugin: Fixed DbDelta on plugin update
-Plugin: Fix shell exec detect function
-Installer: Fix update definer on store procedure creation
-Installer: Improved installer and engine parameters (File extraction and Database install)
-Installer: Moved database params connection at the beginning of the installer vefore the validation
-Installer: Added and improved validations checks
-Installer: Improve validation feedback
-Installer: Improved open base_dir check
-Installer: improve store procedures and database views managment

 

3.8.9.3
Release Date: 2020-8-23
WordPress Version: 4.0 or greater
PHP Version: 5.2.17 or higher
FIXED
–Plugin: Improved security when saving storage entities
-Plugin: Fixed mysqldump execution problem for v5.7.31+ of MySQL

3.8.9.2 [2020-8-5]
FIXED
-Plugin: WPConfigTransformer renamed
-Plugin: users.ini retention skipped properly
-Plugin: Fix for edge case issue with MySQLDump
-Plugin: SFTP send file test works
-Plugin: Dropbox send file test improved
-Plugin: Fix for multisite edge case

 

3.8.9.1 [2020-6-2]
FIXED
-Plugin: Storage test on non-Amazon servers fixed
-Plugin: Removed code giving warning for use of ‘self’ on older PHP versions
-Installer: Removed fetch_all dependency causing errors on some machines
-Installer: Auto deactivating WP Rocket due to problems when migrating that plugin
-Installer: Fixed bug with charset and collation being set to empty if unrelated test fails

 

3.8.9 [2020-5-19]
NEW
-Plugin: Added ability to include hash in default installer name for improved security
-Plugin: Improve performance on frontend
-Installer: Reset password for admin users
-Installer: Option to keep existing users during overwrite installation
-Installer: Added Installer notices for custom paths
FIXED
-Plugin: Fixed ability to detect recursive links
-Plugin: Fixed bug with subsite->standalone migration
-Plugin: Improved logging
-Plugin: Fixed bug in retrieving package status
-Plugin: Autodetect Apache Auth User
-Plugin: Managed situation where wp-config.php is in parent of home path
-Plugin: Improved database query efficiency
-Plugin: Improved compatibility with WPEngine
-Plugin: Improved logic to determing default charset and collation
-Plugin: Fixed but with OneDrive uploading
-Plugin: Fixed bug for foreign keys in database
-Plugin: Fixed bug for case insensitive tables
-Installer: Fixed permissions bug
-Installer: Auto disable Woocommerce Admin plugin
-Installer: Improved detection of installer/archive mismatch
-Installer: Improved compatibility with managed WordPress servers
-Installer: Improve managment of config files (wpconfig, htaccess, webconfig, php.ini, user.ini)
-Installer: Add new wp-config settings
-Installer: Add new wordpress tests for warnings and fatal errors (frontend, backend) at the end of install

 

3.8.8.1 [2020-4-20]
FIXED
–Installer: Security hardening
-Installer: Fixed issue with incompatibility with NGINX
-Installer: Fixed issue with WordPress boolean parameters
-Installer: Fix to address rare SQL query failures in some circumstances
-Installer: Updated fonts
-Installer: Fix when installing on nginx reverse proxy configuration

 

3.8.8 [2020-3-23]
NEW
-Plugin: Plugin activation message after install now dismissable
-Installer: Option to insert database without clearing first. Allows multiple WordPress installs on one database when prefix changed.
FIXED
-Plugin: Improved MySQL error detection
-Plugin: Fixed error caused when permissions of backups folder changed
-Installer: When doing subsite to standalone, only standalone site’s tables displayed in scan table selection box
-Installer: Added auto update of rewrite rules after install
-Installer: Improved engine search/replace ability to better handle more obscure search values
-Installer: Overhauled to adhere to MVC pattern + views templating (required for upcoming features)
-Installer: Improved DupArchive extraction error messages

 

3.8.7.1 [2020-2-12]
NEW
-Installer: Step 3 install chunking on by default
FIXED
–Plugin: Security fix
-Plugin: Fixed bug involving email not being sent for failed scheduled builds under certain conditions
-Plugin: Fix so Scan handles file/folder names that are ‘0’
-Plugin: Schedule copy bug fixed
-Plugin: Home path bug on OVH hosts

 

3.8.7 [2020-1-13]
NEW
-Plugin: Support for managed hosts and many other systems that have non-standard directory configurations
-Plugin: htaccess name hashed in archive
-Plugin: Better support WPEngine
FIXED
-Plugin: Table prefix rename
-Plugin: OneDrive access scope option added and size parameter fixed
-Plugin: Support for when homepath/abspath different from standard sitution
-Plugin: Bug fix admin-ajax.php causing 400
-Plugin: Trace log off button fixed
-Plugin: Fix for MySQL compatibility mode
-Plugin: Bugfix for automatic plugin activation
-Plugin: Google transfer improvements
-Plugin: OneDrive transfer improvements
-Plugin: Dropbox test button fix
-Installer: Retaining htaccess option fixed
-Installer Managed Liquid Web fix
-Installer: cPanel functionality fixed
-Installer: .htaccess filename hashed
-Installer: Jetpack auto renamed
-Installer: Collation fallback fix

 

3.8.6.2 [2019-11-24]
FIXED
-Plugin: Fixed installer/package download link handling.
-Installer: Non-standard port fix.
-Installer: Fixed handling of WP_AUTO_UPDATE_CORE
-Installer: Fixed handling of WP_DEBUG_LOG.

 

3.8.6.1 [2019-11-13]
NEW
-Installer: More parameters supported in installer
-Installer: Improvement in UI organization of installer
-Installer: Lots of structural improvements for better support for managed hosting and non-standard WordPress installs
-Installer: New option to base wp-config.php on newly installed site on wp-config-sample.php
FIXES
-Plugin: UI tweaks needed for WordPress 5.3
-Plugin: Proper error message when building package > 2.1GB on a 32-bit PHP system
-Plugin: OneDrive fix
-Plugin: Legacy collation and charset fallback logic improved
-Plugin: Added detection for ability to capture stored procedures
-Installer: Fix for multisite install when domain contains more than 3 parts
-Installer: Fixed bug where archive would sometimes not be deleted after install
-Installer: Proper error message when attempting to install on a 5.2-based system

 

3.8.6 [2019-11-11]
3.8.6 Pulled due to newly introduced bug.

 

3.8.5.1 [2019-10-6]
FIXES
-Installer: Amount logged from database operations reduced
-Installer: Empty search/replace strings properly handled
-Installer: WP Bakery plugin can be activated in the event auto-deactivation causes problems for other plugins

 

3.8.5 [2019-9-23]
NEW
-Plugin/Installer: Support for Liquid Wed Managed WordPress hosting
-Plugin: Improvement in Quick filter design and usability
-Plugin: Option to unhook javascript from other plugins in admin to prevent conflicts
-Plugin: Update OneDrive library to use Graph API instead of older Live SDK
-Installer: Highlighting differences in name of archive when wrong archive used
-Installer: Added new managed wp-config.php defines on step 3
-Installer: Improved plugin selector interface
-Installer: New files folder added to contain configuration files from original website
FIXES
-Plugin: Fixed DupArchive package getting stuck at 65%
-Plugin: Improved DB Validation
-Plugin: A Package download button is disabled in HomeStead
-Plugin: Misc multisite to standalone issues
-Plugin: Fixed table doesn’t exist error
-Plugin: GoogleDrive test failed in certain machines
-Plugin: ZipArchive Package mode produces erroneous package in the HomeStead Environment
-Plugin: Onedrive not purging packages when installer has non standard name
-Plugin: Display correct error message for memory error on package creation
-Plugin: Fixed timezone related issue – Third Party plugin conflict
-Plugin: Reworked recursive adding of directories for installer files in ziparchive mode
-Plugin: Fixed Ui stickiness issue on Packages Detail Page
-Plugin: Fixed fatal error on PHP 5.2.9
-Plugin: Archive creation time reset to back to local
-Plugin: Database logging fix
-Plugin: Excluding some sites on mu packages created with php sql mode creates bad sql file
-Installer: Overhauled Installer internal design to enable upcoming features
-Installer: WPBakey page builder auto deactivated after migration to prevent post-migration issue
-Installer: Popup Maker plugin auto deactivated to prevent post-migration issue
-Installer: WP Force SSL plugin auto deactivated to prevent post-imgration issue

 

3.8.4.1 [2019-7-23]
FIXES
-Plugin: Fix for OneDrive Business token expiring in 90 days
-Plugin: Excluding .opcache folder when building package
-Plugin: Host throttle timing fix
-Installer: Fixed bug where WP_Debug and other wp-config.php values auto turned-on

 

3.8.4 [2019-7-15]
NEW
-Plugin: Comments now supported on filters
-Plugin: Added confirm checkbox on scan warnings
-Plugin: DupArchive auto-selected when on GoDaddy
-Plugin: Option to clear all packages and settings on uninstall
FIXES
-Plugin: Memory improvements
-Plugin: Encryption of storage, other fields in secure global now optional, based on a setting
-Plugin: Chunking My SQL Dump on package build and installer
-Plugin: Delete default local file delete logic rewritten (delete_default_local_files)
-Plugin: Changed to only to allow network activation when running on multisite
-Plugin: Orphaned package files changed
-Plugin: Many changes made to package entity
-Plugin: Fixed bug involving database password setting in config
-Plugin: Out-of-the box support for WPEngine
-Plugin: Fix to FTP transfer
-Plugin: Obscure database connection data in lightbox
-Plugin: Build button disabled when package in canceling state
-Plugin: Ability to copy from current manual package configuration to template
-Plugin: When database only package created, show nothing to filter on build
-Plugin: Fix to Google Drive/FTP test and Google sending
-Plugin: Throttle logic/values changed
-Plugin: mysql dump size option in package creation
-Plugin: duplicator force network activation if is wpmu installation
-Plugin: fixed subsite filter bug on wpmu installation
-Plugin: Imrove LOG in package creation
-Plugin: fix bug when much table are excluded in package creation
-Plugin: Plugin: clear all package button added
-Plugin: Multisite table filter fixed
-Installer: Styling fixes
-Installer: Normalize domain when www used
-Installer: Config transformer fix that affected JavaScript?
-Installer: Tweaks to dawn status handling
-Installer: Improved logging
-Installer: Max serialized object length now an input option
-Installer: Local by flywheel/ Ngrok URL fix
-Installer: New favicon
-Installer: Reduced size by moving out crypt stuff
-Installer: Hide passwords with show/hide button
-Installer: Fixed problem involving non writeable files
-Installer: UI change related to GTID check
-Installer: Setting file permissions logic changed
-Installer: WP_CONTENT_URL update in wp-config.php bug fix
-Installer: no permission file check don’t block the installer
-Instalelr: normalized www and non www old url
-Installer: now db chunking is enabled for mysql dump packages
-Installer: improve php notice log in bootstrap
-Installer: fixed plugin and themer remove when deactivated and remove rendundant option is enable.
-Installer: fix SO 32bit check
JoJoThemes Developer Team do their best to share Free WordPress Themes, Professional Blogger Templates and other PHP Scripts. JoJo Themes always try their best to find best Premium WP Themes so that you could always Download files and could remain update with more latest updates. You can join us and follow us by visiting our following Social Media Pages.